Back to top

1990 Custom TD Center Cockpit Cutter

Trinidad

$360,000

              *** DRASTICALLY REDUCED.  BRING ALL OFFERS. OWNERS WANT TO SELL***

                                                           ***AS IS WHERE IS***

S/Y HANALEI BAY is a beautiful custom aluminum cutter designed by John Simpson and built by TD Manufacturing in Vancouver, BC. She is heavily built to Commercial Canadian Steamship Standards with 1'' plating at the keel and stem, graduating to 1/4'' at the sheer. The cambered flush deck is also 1/4'' plating. The original and present owner has sailed the yacht extensively in the Atlantic, Pacific, Caribbean and Mediterranean. As of June 2013 she is south bound from the Virgin Islands to Trinidad for the summer season where she will be hauled out for annual maintenance. The hull form and powerful cutter rig provide excellent performance and stability. The yacht offers a spacious deck layout featuring a roomy center cockpit and helm station protected by a hard dodger and bimini top. The fore, aft and side decks are uncluttered and easy to move about on. The interior offers a full width salon, spacious galley, work shop, five private cabins and four heads. A unique transom design allows excellent access to the water or tender. Hanalei Bay is a very comfortable yacht that has been well cared for by her knowledgeable owner. She is ideal for private or charter use and is strong enough to venture into extreme latitudes      

Basic Boat Info

Price: $360,000
Boat Name: Hanalei Bay
Make: Custom TD
Model: Center Cockpit Cutter
Year: 1990
Condition: Used
Category: Sail
Construction: Aluminum
Keel Type: Fin Keel

Dimensions

Length: 72 ft
Length Overall: 73'6 ft
Length Of Deck: 70'4 ft
Waterline Length: 59 ft
Beam: 18 ft
Max Draft: 8'6 ft
Displacement: 98,000 lb
Ballast: 36,000 lb
Single Berths: 4
Double Berths: 3
Cabins Count: 5

Engines / Speed

Engines: 1
  • Make: Isuzu
  • Model: 6 cyclinder turbo
  • Fuel: Diesel
  • Engine Power: 180hp
  • Propeller Type: 3 Blade
  • Year: 1990
  • Engine Hours: 13980
Cruising Speed: 8 kn

Tanks

Fuel Tanks: 3
Fuel Tank Capacity: 120.41 ft³
Fuel Tank Material: Aluminum
Water Tanks: 3
Water Tank Capacity: 112.38 ft³
Water Tank Material: Aluminum
Holding Tank Count: 2
Holding Tank Capacity: 9.63 ft³
Holding Tank Material: Plastic

Other

Heads Count: 5
Boat Class: Cutter

Contact

Maritime Yacht Sales

Office

Maritime Yacht Sales
6501 Red Hook Plaza Suite 201
St. Thomas, VI, 00802
Tel:340-774-3175


Accommodations

The layout offers five private cabins, four vacuum flush fresh water heads, roomy salon, gourmet galley and functional work shop. The interior is well lit and ventilated by way of numerous deck hatches, opening ports and fixed windows. Two air conditioning units cool the private cabins when desired and a Dickinson diesel heater is centrally located in the salon for comfort in colder latitudes.

Beginning forward there is cabin furnished with a double v-berth, large deck hatch and storage shelves. Immediately aft to port there is a walk-thru head compartment equipped with vanity, mirror, toilet and shower which is shared between the forward cabin and the crew cabin just aft to port. The crew cabin is furnished with stacked single berths outboard and clothes washer / dryer inboard. To starboard there a guest cabin with double berth, bulkhead mirror, storage locker and ensuite head with vanity, mirror, toilet and shower. Moving aft and one step up is the salon which features a large dinning table to port capable of seating eight to ten people with a long U-shaped settee outboard and bench seat inboard. A convenient desk and storage shelf is located aft of the dinning area outboard to port. Two steps down and further aft is a guest cabin with two single berths and ensuite head with vanity, mirror, toilet and shower. The starboard side of the salon features a settee forward, entertainment cabinet with large flat screen TV outboard and wet bar aft. The companionway steps enter the salon slightly offset to starboard. Moving aft and two steps down on the starboard side is the long galley which is fully equipped with plenty of counter space and excellent ventilation by way of three opening ports and a transom door which draws air thru from the salon. A functional work shop is directly aft of the galley and fitted with a work bench and numerous tools and spare part compartments. The transom door opens out to the stern platform.  Aft of the galley to port is the owner's cabin with double berth and ensuite head with vanity, mirror, toilet and separate shower stall.

     

Galley

Double stainless steel sinks

Hot and cold pressure water system

Magic Chef upright refrigerator / freezer

Large built-in freezer with spill over refrigeration space - 2 large cold plates

Both refrigerator and freezer units operate on 110 Volt and engine driven compressors

Seaward Princess 3-burner propane stove with oven - 2010 

Garland commercial griddle - 220 Volt

Emerson microwave oven with grill browning function

Full size propane BBQ grill on aft deck

Deep fryer

Pasta machine

Waffle maker

Toaster

Blender

Coffee maker

Extensive collection of utensils, cutlery, cookware, dinnerware and table linens

 

 

Electronics and Navigation

Standard Horizon GPS Chart 1801 color chart plotter - 2010

Caribbean chart chip

Handheld Garmin Etrax GPS

Raytheon 24 mile radar

ComNav 2001S autopilot with Wagner hydraulic pump

Raymarine Tridata (depth, speed, sea temperature)

Datamarine wind direction indicator

Standard Horizon Matrix VHF radio

Icom hand held VHF radio

Stratos satellite telephone

(2)Motorola walkie talkie

Daiko compass

406 EPIRB

Toshiba 26' flat screen TV

Samsung DVD/VHS player

Sony CD/AM/FM stereo with IPOD docking station

(4)Salon speakers

(2)Cockpit speakers

 

Electrical

12 Volt DC circuit and breaker panel

Battery selector switches

(6) 2 Volt house batteries, 1200 ah - 2007

(4)12 Volt engine & generator batteries, 800 ah - 2010

65 amp engine alternator

50 amp engine alternator

(2) Bilge pumps

(1) High water bilge pump with alarm

(1) Water pressure pump

Cabin lights

Deck lights

Running lights

110 Volt 30 amp AC circuit with breaker panel

110 Volt 30 amp shore power cord

Isuzu 15 KW generator producing 110V and 240V

140 amp battery charger

Xantrex 3000 watt inverter

 

 

Mechanical

180 hp Isuzu 6 cyclinder FWC turbo charged engine

14,360 engine hours in June 2013

Borg Warner transmission

2'' stainless steel drive shaft

Conventional stuffing box

24'' fixed 3-blade stainless steel propeller

Morse engine controls

(2)Engine alternators

Engine driven emergency bilge/fire pump

Hydraulic steering system with 3'' Kobalt ram

70 ton auto pilot with Wagner hydraulic pump

Emergency tiller

Halon automatic fire suppression system in engine room

14" hydraulic bow thruster

Muir hydraulic anchor windlass

15KW Isuzu 4 cylinder diesel generator installed in 2008

9,890 generator hours in June 2013 

(2)16,000 BTU air conditioning units

Sea Recovery 25 GPH water maker - requires service

 

 

 

Hull & Tankage

Built to Commercial Canadian Steamship Standards

Heavy aluminum construction

1'' Aluminum plating along centerline and at stem graduating to 1/4'' at sheer

Water tight collosion bulkhead forward with deck access

Elongated fin keel with internal lead ballast

14'' hydraulic bow thruster

Skeg rudder

(4)Sea chests service all plumbing below water line

Hull coatings below waterline removed - 2009

New epoxy barrier below waterline - 2009

Last antifouling paint - October 2012

New Awlgrip hull topside paint - 2006

(14)Opening ports in hull topside

6'' Fiberglass hull insulation (R-12) covered by fiberglass interior panels 

2" Rockwool insulation in engine room and workshop

Hinged transom platform with boarding ladder 

Heavy duty transom door leading to workshop

Handheld transom shower

(3)Aluminum fuel tanks

(2)Aluminum water tanks

(1)Small stainless steel water tank for bar

(2)Bladder waste tanks 

 

Deck

1/4'' aluminum deck cambered for additional strength and drainage

White Awlgrip deck finish

Aluminum deck bulwark with varnished teak caprail 

New teak caprails installed - 2013

Stainless steel bow pulpit

Welded aluminum stanchion bases

Stainless steel stanchions

40" high stainless handrail

Double course lifelines below handrail

Stainless steel stern pulpits

Removable stern rail

Double anchor roller on bow

Muir hydraulic anchor windlass with deck controls

Chain locker with deck access plate

Anchor wash down system

(3)Foredeck hatches

Aluminum super structure

(1)Opening port in super structure

(1)Butterfly hatch atop super structure

Butterfly hatch can be removed to facilitate engine or generator removal

Fixed windows around super structure

(2)Sliding ports in super structure

Open side decks with one step up to cockpit and aft deck

Aluminum dodger with sail view window in top

(1)Opening dodger window on center-line

Helm station offset to port

Companionway offset to starboard

Spacious center cockpit with U-shaped seating area

High cockpit seat backs with storage compartments outboard

Large cockpit table with hinged leaves

Cockpit Bimini top with side and aft curtains

Flush Aft deck

Free standing full size BBQ grill

Plastic table with six chairs

Aluminum radar arch

Bimini top above aft deck

Electric davit on starboard quarter  

Removable stern rail for dinghy deck storage during passages

Curved stairway leading to transom platform on port side

Hinged stern platform with boarding ladder

Transom shower

 

 

 

 

Rigging and Sails

Anodized aluminum double spreader mast stepped on keel

Mast steps

Aluminum boom

Telescopic spinnaker pole

1x19 wire standing rigging with Norseman terminals

Annual rig inspections

Genoa with Hood roller furler

Staysail with Profurl roller furler

(1)Lewmar 48 ST Power winch

(2)Harken 78 ST 2-speed primary winches

(3)Harken 46 ST 2-speed winches

(3)Harken mast winches

Quantum mainsail with three reef points - 2009

Mainsail rigged with lazy jacks

Quantum 120% genoa - 2010

Staysail

Nylon spinnaker

 

 

Additional Equipment

13' 6'' Caribe RIB dinghy with 40 hp.Yamaha Enduro engine - 2010

10' Caribe RIB dinghy with 8 hp. Yamaha engine

150 # CQR primary anchor w/250' 3/8'' chain

75 # Danforth anchor with 75' 3/8'' chain and 150' nylon rode

40 # Danforth Hi-Tensile anchor 

(2) Kayaks with paddles

Adult and junior water skis, ski vests

Wake board, Banana Blaster & noodles 

Assorted snorkels, masks and fins

Fishing gear

Canvas deck awning

Hatteras double sized hammock

Deck cooler

Bosum's chair

Handheld search light

First aid kit

(10) Solas life jackets

(2)Life rings with strobe lights

Flare kit

Safety harnesses

Zodiac 6 person life-raft - requires inspection renewal

Docklines and fenders

 

 

 

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

Please call our office at 340-774-3175 or email us at info@maritimeyachtsales.com for more information


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.